| View previous topic :: View next topic |
| Author |
Message |
Taiping
Joined: 18 Nov 2008
Posts: 23
|
 Posted: Tue May 05, 2009 2:52 pm Post subject: where can i get Amsoil? |
 |
|
| Hi guys, Do you know where can i get the Amsoil Saber 100:1 pre mix oil for my DA 50? I am in vancouver, hope to find a neer place to get it! Thanks |
|
| Back to top |
|
 |
Lawn Ranger
RCFCBC Club Member
Joined: 14 Dec 2005
Posts: 278
Location: LANGLEY
|
| Posted: Tue May 05, 2009 4:05 pm Post subject: |
|
|
Taiping...
GOOGLE it...
There's a few pilots down South and locally that have switched over to RedLine. Aparently AmsOil doesn't have enough detergent in the oil, which in term carbons up your mufflers/cannisters.
I still use AmsOil and bought mine off a fellow modeler down South. Send Paul Dries a PMessage, he has a contact for AmsOil. Check with Bill F or Harv on the RedLine.
Jerry |
|
| Back to top |
|
|
Gilesflyer
Vice-President
Joined: 06 Apr 2002
Posts: 717
Location: Surrey, BC Canada
|
| Posted: Tue May 05, 2009 5:01 pm Post subject: |
|
|
I have a couple of litres of Amsoil if you want it. Not sure what I paid for it. There is a guy in the Port Kells area that is the local Distributor. I will sell it to you for $12.00 per quart. The stuff I have is the sabre professional that allows you to mix up to 100:1...let me know if you want 1 or 2 quarts....
_________________
"THE PROBLEM WITH "COMMON SENSE" IS THAT IT IS NOT ALL THAT "COMMON"
"Only 10% of the work is done when you reach the covering stage" |
|
| Back to top |
|
|
Taiping
Joined: 18 Nov 2008
Posts: 23
|
|
| Back to top |
|
|
Taiping
Joined: 18 Nov 2008
Posts: 23
|
| Posted: Tue May 05, 2009 7:27 pm Post subject: |
|
|
| Jerry, dose that means redline will work better?when i change fuel in my nitro,the engine dose not runs propely, will that hapen to gasers? |
|
| Back to top |
|
|
Gilesflyer
Vice-President
Joined: 06 Apr 2002
Posts: 717
Location: Surrey, BC Canada
|
| Posted: Tue May 05, 2009 9:20 pm Post subject: |
|
|
| Taiping wrote: | | http://www.amsoil.com/storefront/atp.aspx do you have this one? |
Yes that is the one I have...Oil will not make much difference in performance...actually I doubt you would even notice it.
_________________
"THE PROBLEM WITH "COMMON SENSE" IS THAT IT IS NOT ALL THAT "COMMON"
"Only 10% of the work is done when you reach the covering stage" |
|
| Back to top |
|
|
jommarjohn
Joined: 02 Feb 2010
Posts: 1
|
|
| Back to top |
|
|
Gilesflyer
Vice-President
Joined: 06 Apr 2002
Posts: 717
Location: Surrey, BC Canada
|
| Posted: Fri Feb 05, 2010 10:27 am Post subject: |
|
|
Jommarjohn,
as a new member of the site, please tell us about your experience in the hobby of model aviation???
_________________
"THE PROBLEM WITH "COMMON SENSE" IS THAT IT IS NOT ALL THAT "COMMON"
"Only 10% of the work is done when you reach the covering stage" |
|
| Back to top |
|
|
|
Album
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
