"RCFCBC" Forums For All....

Eagle_63

Hey Daddiekat,
Guess who has an Airboat project well under way. :wink: 8) (Thanks Roger!)
Hey Combat_Pilot, I'll get those pictures to you soon.
_________________
There is no such thing as "spare change"

Flyin High · Posted: Wed Aug 05, 2009 5:45 am Post subject:

Daddiekat

Eagle_63 · Posted: Wed Aug 05, 2009 9:14 pm Post subject:

Not sure if being a "Legend in your own mind" :P will be enough to carry you through this coming season. While I don't have your degree of self confidence, I'm hopeful that with a lot of elbow grease, some recycled parts, and a little luck, I'll give Bunnyface a face full of prop wash. Twisted Evil

_________________
There is no such thing as "spare change"

Daddiekat · Posted: Thu Aug 06, 2009 5:54 am Post subject:

Scotte · Posted: Fri Dec 11, 2009 2:25 pm Post subject:

Are you guys ready? I have an idea for a safe place to run tomorrow, depends on the thickness of the ice and the land owners permission, which shouldn't be a problem.........
_________________
www.smart-fly.com TEAM PILOT
MAAC Assistant Zone Directer
SCOTTE 540--Borderline IMAC Team
Spectrum Flyers President

Flyin High · Posted: Fri Dec 11, 2009 2:39 pm Post subject:

Eagle_63 · Posted: Fri Dec 11, 2009 10:49 pm Post subject:

Plowboy · Posted: Sun Dec 20, 2009 11:52 am Post subject:

Does it have to actually be an "Airboat"? I tried out my secret weapon(classified info.) and I think I could WIPE all you guys, providing the snow was not too deep! (It's not a plane!)

PS....Danny knows, but was sworn to silence...I think!

Flyin High · Posted: Sun Dec 20, 2009 1:03 pm Post subject:

Plowboy · Posted: Sun Dec 20, 2009 2:06 pm Post subject:

Ahh, you are also sworn to silence by association, but I have a funny feeling the truth will come out. Bring forth "El Destructo" and prepare for battle.

Eagle_63 · Posted: Sun Dec 20, 2009 4:04 pm Post subject:

Plowboy · Posted: Sun Dec 20, 2009 4:29 pm Post subject:

I don't think too many guys realise how noisey the intake is. I am trying to be a little pro-active in reducing my noise "footprint" in anticipation of the new field and possible reduced DB levels. I was actually quite surprised what a big difference my little "mod" made. I am now working on version 2.

Gilesflyer · Posted: Sun Dec 20, 2009 8:31 pm Post subject:

Dave,
it would be nice if you could bring said noise reduction device to the next meeting and give us a short presentation on your findings!
_________________
"THE PROBLEM WITH "COMMON SENSE" IS THAT IT IS NOT ALL THAT "COMMON"
"Only 10% of the work is done when you reach the covering stage"

Plowboy · Posted: Sun Dec 20, 2009 10:04 pm Post subject:

I could do a basic overview. I'm still playing with diameters, filter sizes, end of tube locations etc. By Saturdays efforts, it looks like a very worthwhile experiment.