| View previous topic :: View next topic |
| Author |
Message |
Saito
RCFCBC Club Member
Joined: 31 Dec 2005
Posts: 85
Location: cloverdale
|
 Posted: Sat Dec 20, 2008 12:46 pm Post subject: i WANT AN ELECTRIC HELI FOR cHRISTMAS |
 |
|
AGNH1100C
T-REX 450SA ARF w/Motor/ESC
IS THIS A GOOD START FOR ME AND ARE THEY HARD TO SET UP
EFLRG90HL — Micro G90 Heading Lock Gyro
Vendor: E-FLITE
Category: Helicopter Gyros
FLP21703S — Li-Po 3S1P 2170mAh 11.1V 25C
Vendor: FLIGHT POWER
Category: Lithium Batteries, 3 Cell
Includes Align T-REX 450SA ARF helicopter, 430L 3550Kv motor and 35G ESC for one low price!
ALIGN T-REX 450SA ARF ELECTRIC MINI HELI - AGNH1100
Extreme 3D capability right out of the box
95% factory-assembled
Stacked aluminum frames
Direct-to-swash CCPM linkages
Aluminum and composite swashplate
Aluminum motor and battery mounts
Tail servo boom mount
Belt-driven tail rotor
Stainless steel tail rotor hub
Auto-rotation system
325mm PRO symmetrical wooden main blades
Gun-metal gray aluminum head block
Gun-metal gray aluminum skids and tail boom
ALIGN 430L BRUSHLESS MOTOR, 3550Kv RCM-BL430L - AGNM4365 (Included)
Perfect choice for all-out 3D aerobatics or sport flying
Lightweight, high-torque performance
Internal fan and open endbells for maximum cooling
Slotted 6-pole 'outrunner in a can' design
ALIGN 35-AMP BRUSHLESS ESC W/GOVERNOR MODE, 5V BEC W/EC3 - AGNE35G (Included)
Up to 35A continuous current with proper airflow
Compatible with 2-4S Li-Po or 6- to 12-cell Ni-Cd/Ni-MH packs
Dual BEC regulators
Programmable functions, including voltage cutoff, brake, governor and more
Align is acknowledged by modelers around the world as the undisputed leader when it comes to advancing high-performance electric heli technology. The T-REX 450SA is just one more product of this relentless innovation. Using a combination of tough, lightweight aluminum and updated composite parts, Align has designed and equipped the T-REX 450SA to be capable of the most extreme 3D maneuvers right out of the box. And since it’s 95% assembled, you can have it flying in just a few hours.
_________________
if the engine fits-THEN FLY IT... |
|
| Back to top |
|
 |
kobe larry
RCFCBC Club Member
Joined: 29 Oct 2006
Posts: 48
Location: vancouver or thailand
|
| Posted: Sun Dec 21, 2008 3:06 pm Post subject: |
|
|
| you can not go wrong with it. It is a good heli to start and end with can get you from first flight to hard 3d.Many people here are flying then and yesterday at a fun fly I watched many hard 3d flights. It is a little hard to learn in the wind but if you take your time and fly when it is nice out you will have no problem. Good luck hope to see you fly it one day. |
|
| Back to top |
|
|
Combat_Pilot
RCFCBC Club Member
Joined: 02 Feb 2007
Posts: 102
Location: Langley
|
| Posted: Sun Dec 21, 2008 5:06 pm Post subject: |
|
|
Perfect choice for all-out 3D aerobatics or sport flying in the electric world.
Have fun and happy flying.
_________________
Could someone tell me where my throttle hold switch is... I'm about to crash. |
|
| Back to top |
|
|
|
Album
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
